The major concept of this original method of the OIS synthesis is

The major concept of this original method of the OIS synthesis is a polymerization of OIS in

a reactive mixture of liquid organic and inorganic oligomers, which have free reactive groups in their molecular structure. Varying organic buy Napabucasin and inorganic oligomers allows obtaining of the final product, OIS, with a wide range of physical-chemical characteristics. Previously, we have reported that OIS synthesized by joint polymerization of various organic oligomers and sodium silicate (inorganic component) have different properties, depending on the formed hybrid structures [13–17]. Such OIS have also a high level of ionic conductivity in a wide temperature range due to an ionomeric polymer matrix (high-molecular-weight polyurethane) and presence of a number of the charge carriers, mainly sodium cations Na+, in a mineral phase. That makes these OIS perspective polymer materials for solid electrolytes and membranes for fuel cells. Whereas complex electrophysical properties (electric, dielectric and important mechanical characteristics) in Selleckchem IBET762 respect to structural

organization of OIS have not CFTRinh-172 manufacturer been yet studied, so such relationship by OIS’s relaxation behavior is established in the present work. Methods Materials and processing Organic component of OIS consists of two isocyanate-containing products: urethane oligomer-macrodiisocyanate (MDI) with Mw = 4,500 that contains two free reactive NCO groups. MDI was synthesized on the base of 2,4-toluene diisocyanate and oligooxypropyleneglycol with Mw = 2,100. low-molecular-weight isocyanate-containing modifier poly(isocyanate) (PIC) with Mw = 450 and three free reactive NCO groups. PIC was based on a composition 50/50 of diphenylmethandiisocyanate (Mw = 250)/isocyanate isomers. PIC of type D was used. Inorganic component was sodium silicate Methocarbamol (SS) existing in the form of oligomer in water solution with the general formula where b/a is silicate module. Industrial sodium

silicate with characteristics defined by the national standard GOST 13078-81 was used. The value of b/a is equal to 2.8, and the density is 1.45 g/cm3. The detailed characteristics of the products were given in [10]. OIS were synthesized in situ in a reactive mixture of organic and inorganic oligomers; the reactions of synthesis were described in [11, 12]. Weight ratio of MDI/PIC was varied in the range from 0/100 to 100/0 that gave the opportunity to change the reactivity of the organic component. The ratio of the organic/inorganic components (MDI + PIC)/SS equaled to 70/30 for all hybrid compositions. The reactive mixtures were placed into Teflon moulds (Wilmington, DE, USA) where the OIS curing passed during 24 h at room temperature (T = 22°C ± 1°C). Equipment and measurements The differential scanning calorimetry investigations (DSC) were carried out using TA Instruments 2920 MDSC V2.

Comments are closed.